Hi all
I just installed my 6k HID foglight conversion kit I bought from ebay. I opted for the slim version and they say its made in Korea. ($79.50 shipped)
http://cgi.ebay.com/ebaymotors/ws/e...o=CRX&its=S%2BI%2BSS&itu=ISS%2BUCI%2BSI&otn=4
View attachment 148488
Everything connected very easily and I only had to use the wires for the bulb, the other wire for the plug extension was not used.
Removal of the front bumper was not hard, all the front Lower 10mm screws the inner wheel piece was 'bent out of the way to get to the 2 10mm screws holding the bumper to the body (under headlight) and some plastic push button clips on grill area.
Passenger side: ( I used double sided tape on the back of the ballast and the mount bracket)
View attachment 148489
Driver side (other power extension wire removed)
View attachment 148490
View attachment 148491
(sorry I have to get a shot of the other angle.)
I just installed my 6k HID foglight conversion kit I bought from ebay. I opted for the slim version and they say its made in Korea. ($79.50 shipped)
http://cgi.ebay.com/ebaymotors/ws/e...o=CRX&its=S%2BI%2BSS&itu=ISS%2BUCI%2BSI&otn=4
View attachment 148488
Everything connected very easily and I only had to use the wires for the bulb, the other wire for the plug extension was not used.
Removal of the front bumper was not hard, all the front Lower 10mm screws the inner wheel piece was 'bent out of the way to get to the 2 10mm screws holding the bumper to the body (under headlight) and some plastic push button clips on grill area.
Passenger side: ( I used double sided tape on the back of the ballast and the mount bracket)
View attachment 148489
Driver side (other power extension wire removed)
View attachment 148490
View attachment 148491
(sorry I have to get a shot of the other angle.)
Last edited: