2017 Black Trim Parts

Not sure about the other parts but I was quoted pretty high for wrapping the side air vents. $350 at StickerCity and $300 at a different vinyl wrapping place.. reason being that there are a lot of angles to wrap
 
veritas said:
Not sure about the other parts but I was quoted pretty high for wrapping the side air vents. $350 at StickerCity and $300 at a different vinyl wrapping place.. reason being that there are a lot of angles to wrap
Click to expand...

That price sounds about right if thats the total for both, its a bit cheaper than getting the vents as I believe they are about $200+ each.
 
I just ordered the camera from ebay for $60(same 12-17), now I'll just need a 2017 emblem or drill a hole in the emblem that came with it. It is slightly different from 12-16 due to the grille pattern
IMG_5582.JPG
 
Thanks JC - just ordered the grill. I have a 2015 so the camera can be re-used?
 
yes the 2015 camera can be used. the slight issue is that the emblem it ships with doesn't have the hole for the camera either..
 
its in the same place it's just that this part doesn't have the hole punched out, If you look at the picture you can see it outlined just not cut out..
 
It should be 62070-6WP0B in chrome w/ camera. The camera is different than before, new mount on the emblem. If you change your grill/camera, you'll have to program it.
 
RRDorcel said:
It should be 62070-6WP0B in chrome w/ camera. The camera is different than before, new mount on the emblem. If you change your grill/camera, you'll have to program it.
Click to expand...

How do you go about programing it? DO you know if the new camera would work with a 2010?
 
Depending on the year you may need a new bumper but yes it shouldn't have a problem fitting.
 
JayCSmoov said:
Depending on the year you may need a new bumper but yes it shouldn't have a problem fitting.
Click to expand...

Hello, having seen that you have already upgraded your QX70 grill, can you please confirm the following:

1- The grill would mount to the FX 2012 bumper.
2- The camera from FX 2009 can be custom mounted to the 2017 grill.
 
1 yes.
2 it is easier to ude your 2012 camera if you have it but yes an 09 camera will fit with some modifications.
 
Do the parts with black pasti dip that way if you change your mind you just peel it off and go back to the factory Chrome like I did my grill
 

Attachments

  • 20160406_190546.jpg
    20160406_190546.jpg
    131.1 KB · Views: 614
  • 20150714_192653.jpg
    20150714_192653.jpg
    139.3 KB · Views: 542
You must log in or register to reply here.
Back
Top