Tools:
10mm Socket
Flathead Screwdriver
Notes:
It may be easier to fully remove the wheel well splash shield but in this DIY I did not.
Procedure:
1. Remove these 6 10mm bolts (1 not shown).
2. Remove this push retainer with a flathead screwdriver.
3. Pry the shield out of the way and access the fog bulb. You may have to secure the lower shield with something since it will want to force its way closed.
10mm Socket
Flathead Screwdriver
Notes:
It may be easier to fully remove the wheel well splash shield but in this DIY I did not.
Procedure:
1. Remove these 6 10mm bolts (1 not shown).
2. Remove this push retainer with a flathead screwdriver.
3. Pry the shield out of the way and access the fog bulb. You may have to secure the lower shield with something since it will want to force its way closed.