06finSport
Member
2006 Infiniti M45 (2013-01-13 09:41:09)
2006 Infiniti M45
- Thread starter 06finSport
- Start date
Freddie's M45
Member
You should add a side pic
06finSport
Member
Freddie's M45
Member
+1 for white M's with black int.
love the roof spoiler & eye-lids.
love the roof spoiler & eye-lids.
06finSport
Member
I actually need to re tint the windows. The tint that is on there is mirror tint (I HATE mirror tint). I'm used to riding around with double 5% on my cars but I don't think I want to do it on this one. 15% maybe. Still tempted to do 5% though.
Freddie's M45
Member
I went with 20% on sides and 15% just on the rear large windshield.
I wanted 35% on side but it was too light.
I wanted 35% on side but it was too light.
06finSport
Member
Sideways the Seven
Member
Looks good! I've always done 5% on mine.
Sent from my GT-P3113 2
Sent from my GT-P3113 2
DoN BLaZe34
Member
i like!
06finSport
Member
Im debating on it lol, I love limo tint. I LOVE IT. My old truck had it. Double 5 on the back windows.
06finSport
Member
Just a few shots just because
Freddie's M45
Member
You need a little camber, tires are to straight.
06finSport
Member
If I drop it back down a little the camber will come back. Just haven't gotten around to it just yet.
06finSport
Member
Freddie, my preload was nonexistent in the rear. I had to take them out, reset them and do it all again. I'll post pics in a little while to show the change.
Freddie's M45
Member
I like to set preload by hand and then give the ring 2 extra turns with the key. This should give you about 5mm preload.
06finSport
Member
In this pic you can't see the top of the tire anymore. I dropped the whole car another 3/8".
You can see the how the front camber really is now...
Not the best shots right now, cuz I'm tired i think you can get a feel for it.
---------- Post Merged at 12:54 PM ---------- Previous Post was at 12:53 PM ----------
Oh, and it doesn't help that the driveway isn't 100% flat.
You can see the how the front camber really is now...
Not the best shots right now, cuz I'm tired i think you can get a feel for it.
---------- Post Merged at 12:54 PM ---------- Previous Post was at 12:53 PM ----------
Oh, and it doesn't help that the driveway isn't 100% flat.
Freddie's M45
Member
Car is sitting to high for having coilovers.
your going to need to get the front upper camber arms & rear camber arms with bolts.
Set the height you want and wait a few weeks, then get an alignment at your last height setting and you should be good.
your going to need to get the front upper camber arms & rear camber arms with bolts.
Set the height you want and wait a few weeks, then get an alignment at your last height setting and you should be good.
06finSport
Member
I'm not 100% certain I know what you mean by it still sIts too high. I have a finger and a half gap between the top of the tire in the bottom of the fender. I may still invest in those parts. The only problem I have right now is that it feels like my tires are rubbing the fender even though I know they aren't.