2011 FX 35 on 22" Vossen VVS-CV1 Concave Wheels

Looks awesome....the 2nd gens are really starting to compete look wise (with mods) with the 1st gens! :tongue (2):
 
Yerbol said:
here we are :) cleaned and dropped...
hope you will enjoy...

48ced9284251e003-large.jpg


48ced928ab2c50e3-large.jpg


48ced92a9a5c10a1-large.jpg


48ced92b1aa28c13-large.jpg


View attachment 248060

View attachment 248062
Click to expand...

Hey, Yerbol can you tell me if you are running front spacers in this pics? How much and if the tires are 285?
Thank you!
BTW it looks awesome!!
 
Last edited:
hi, baias6230
Yes, I have used Ichiba V2 15mm wheel spacers all around. Vossen CV1 22x10.5 ET42 does not fit on front wheels in FX50. They require wheel spacers. As per my understanding you are owner of FX35 and I do not think you need wheel spacers on it.
Tires I am running in this car are 285/35ZR22 Nitto NT555.

https://www.infinitiscene.com/searc...en-VVS-CV1-Concave-Wheels?p=266821#post266821
Here is my previous post:
Thank you, Guys !

I have used Ichiba's 15mm wheel spacers all around but I would recommend you to use 12mm on front and 20mm on rear. Do not even try 10mm spacers on front, they will not fit.
All these recommendations only for FX50.
 
Last edited:
Thank you, Yerbol! I am not trying to buy a new set of wheels. I just wanted to know because i like the stance and i need some front spacers for my summer set... Wanted to know how much your wheels are sticking out past the fender to get an ideea.
Thank you again!
 
Hi Yerbol, quick question, any rubbing of tires when the suspension completely compresses? From your side pics, it almost looks like a slight poke...

side note, anyone have pics of these in 20 inchers? 22's maybe too rough for nyc streets....
 
hi howiestt
so far I never had rubbing issue but also never tried to compress suspension completely :)
 
Last edited:
ok. I had about 60kg things in my trunk and 2 person in back seat with about 70kg each of them.
no rubbing issue at all.
 
Yerbol, did you use version 1 or version 2 ichiba spacers? Thanks!

---------- Post added at 07:36 PM ---------- Previous post was at 07:35 PM ----------

nevermind, i just saw you used ver2
 
^^^ It's because he lowered it also...lowering yours that are 24s will make your wheels bigger than Yerbol's.
 
Looks very good! I'm surprised there isn't a consolidated thread in the photos section with just pictures of 1st & 2nd gens with specs on the tires/wheels etc... so that everyone can take a collective look.
 
You must log in or register to reply here.
Back
Top