Partnumbers OEM brakepads

W

WietseFX35

Member
Location
Netherlands
Car
2009 FX50S AWD
Heey guyz.

My brake pads are almost worn out and i want to replace them.
Now i have been looking around but since it is quite hard to find Infiniti parts in Holland.:frown:
No way i will go to the stealership so i wanted to have a look at the local Nissan dealer.
But now i found plenty brakepads but i want to make sure i get the right one's.
Does anyone know if the pads from an '03 FX35 2WD comes standard with wear sensors integrated in them?
And what are the partnumbers of the front ones and from the back?

Any help kindly appreciated!!
 
41060-CA093 - FRONT PADS
41080-CA00J - FRONT HARDWARE KIT

44060-AL586 - REAR PADS
44080-8H326 - REAR HARDWARE KIT

Nissan dealership will have all these parts
 
J3FF3R$0N said:
41060-CA093 - FRONT PADS
41080-CA00J - FRONT HARDWARE KIT

44060-AL586 - REAR PADS
44080-8H326 - REAR HARDWARE KIT

Nissan dealership will have all these parts
Click to expand...

I just got my brake pads fron Infinitipatsusa.com The part # for the fronts is same as above but the part # for the rear pads is different 44060-CB10J are these the correct pads for my 04 AWD?
 
They are the same pad the ones you got are the new part number, Nissan/Infiniti change part numbers when they switch suppliers. Either pad will work there are 4 or 5 different part numbered pads that fit our cars
 
Thanks all my goodies came in this week-H&R's,KYB struts and shocks,Strut bearings and brake pads. Time to get to work!:tup:
 
what are the front and rear pad numbers for the 2008 FX. When i checked these parts numbers above they pop up for a 04 fx
 
what website did you find these in? I thought that when u changed the brakes all u did was the rotors and pad. i never knew hardware was needed.
 
Nissan / Infiniti do not sell their pads with and shims or springs ( hardware ) it must be purchased seperatly (if needed) but if you think you will need them the numbers are there for you.

I work at the dealer so I get my numbers here.
 
Hi


I am also looking for OEM front brake pads for a 2006 FX35 AWD. I called my local nissan dealer and they gave me part# 41060-EG090. Is this the right part#? and are the brake pads the same for 2006-2008 models compared with 2003-05? Thanks
 
that part# only comes up for the 04 model though. I was under the impression 2006-2008 were different from 03-05. Can anyone else confirm this? Do you know if the 41060-EG090 will fit the 06-08? There seems to be conflicting part#s here with the dealer as well. Thanks



fxlr8 said:
The part # you listed is for the 2gen.

I am getting 41060-CA093 for the 1gen 03-08
Click to expand...
 
I noticed that some brands give the sizes of the pads, wich in some cases is a bit different.

But now i found i can also purchace discs and pads from EBC Brakes.
I've seen plenty chois is available on ebay (complete kit for around 300 dollar) but i don't know if this is of good quality, compared to a complete set from EBC for around 450 euro/ 550 dollar found here in Europe.

Anybody has some experience with the cheaper parts sold on ebay?
 
You must log in or register to reply here.
Back
Top