What am i doing wrong

[I-Dom-In-8]

Ok so i ordered some Clear/amber bulbs to replace the stock turn marker bulbs, Im turning the shocked/plug and they dont want to come off, I got the Parking lights all done, Took all of 2 minutes..but the turn makers are giving me a hard time, Do they not unhook like the Parking light plugs..

 

[toy4x]

They will come out..they are stuck in pretty good. There is an oring behind the plug making it difficult to turn. Plus its harder to get a good grip on them due to the tightness of the area.

 

[ThE Fx 45 BeAsT]

a long flat tip screw driver should do the trick. there are areas in the bay that will allow to see and push down with the screw driver. they are tuff had me frustrated.

 

[theMerchant]

I found out today that you can also get there easily if you take 2 screws and 1 nut off the front part of the wheel well (plastic part). once its loose, just push it back and you will be able to see the side bulb.

 

[I-Dom-In-8]

I found out today that you can also get there easily if you take 2 screws and 1 nut off the front part of the wheel well (plastic part). once its loose, just push it back and you will be able to see the side bulb.

I will try this method this weekend thanks,

And thanks to the others that have replied