yea i went from the 20 to 24. in the weight i feel a difference in take off but i had to sacrifice a little performance for looks, but i dont mind..
24" Wheels Thread
- Thread starter N2FX
- Start date
Yup you can
WhatevaFx45
Member
- Location
- Roc city
I can't wait until. Can post pics. 24" phino wheels. No rub
lethalfx
Member
- Location
- Columbia SC
What kind of MPG drops are you seeing if any with the larger heavier wheels?
FX4BR
Member
Hey guys. I've found a wheel I like for my 2012 FX. Dimensions are 24x9.5" with a +33 offset. Thoughts? From my analysis, I think it should work and the wheel should sit pretty close to flush to the inside of the fender. What do you guys think?
---------- Post added 04-18-2016 at 08:50 AM ---------- Previous post was 04-17-2016 at 09:50 PM ----------
Do you guys know how much clearance there is behind the stock wheel and the suspension? Of the wheels I found, I would prefer to buy a set that measures 24x9.5" w/ +33 offset, which means the back of my rim would sit 2.05mm closer to the suspension. It also comes in a 25mm offset which would definitely work inside, but might push the rim out too far.
---------- Post added 04-18-2016 at 08:50 AM ---------- Previous post was 04-17-2016 at 09:50 PM ----------
Do you guys know how much clearance there is behind the stock wheel and the suspension? Of the wheels I found, I would prefer to buy a set that measures 24x9.5" w/ +33 offset, which means the back of my rim would sit 2.05mm closer to the suspension. It also comes in a 25mm offset which would definitely work inside, but might push the rim out too far.
FX4BR
Member
24x9.5" +33 offset Dub Push wheels, 285/35-24 Nitto NT 420S tires, and 5mm spacers on the front to clear the calipers. No rubbing at all. I drove about 300 miles yesterday on them, and there is zero vibrating. I was expecting to feel imperfections in the road, but somehow the ride has gotten more smooth; my mind is blown.
Attachments
Nice wheels bro
Love the wheels Brennan, but for me 24" is too big.
FX4BR
Member
A better photo. Very pleased with the results. 24 inches fit nicely. Since they are black, the size doesn't look too big to me. Wouldn't want them any smaller or larger for my personal taste.
Attachments
Much better view Brennan. Love the look in this picture. Thumbs Up.
PEEJ
Weeeeeeee!!!
Nice job on the wheels, man. It looks like you could squeeze some additional sweetness out of your ride with a set of lowering springs. In my opinion that would tie everything together perfectly.
Thought about going that route at all?
Thought about going that route at all?
- Location
- Los Angeles, CA
- Car
- 05 FX35 RWD
Looks good man
Wheels looks awesome bro
- Location
- Nashville, TN
- Car
- 2011 FX35 AWD
New picture looks great. The previous angle/lighting wasn't doing it for me, but this looks really good.
FX4BR
Member
I would like to add lowering springs. Would definitely need to get the camber correction kit if I did, because the tires were almost $300 each. My next move is going to be to get the full OEM aero kit installed (it is in my garage), lower trim painted to match, and bumpers repainted. The customization bug has bit me again. And here I was trying to convince myself that when I bought my car, I wouldn't be doing anything to it this time.
I say this everytime I get a new car lol
- Location
- Los Angeles, CA
- Car
- 05 FX35 RWD
Modding is fun. Make it yours
- Location
- Westchester, New York
- Car
- 09 FX50
No need to lower it.. get a lip kit, will make it look lower without needing to worry about the tire clearance. Stormtrooper!