Wheel offset help!!

F

FXSOTX

Member
hey guys im planning on buying some wheels for my fx but dont understand the offsets on wheels. The wheels are XO Wheels miami matte black/brushed
22'x9 +35mm
22'x10.5 +42mm
give me youre thoughts on how tgey will fit and on the wheels
View attachment 280659
Sent from my SPH-L710 2
 
Those offsets will work fine. Not enough to rub, but not as sunken as stock. Just make sure they the proper bolt patter 5x114.3 and that the bore is big enough to run the proper hub centric rings. They look nice, very clean.
 
yeah there 5x114.3 imma go with 265/35 front and 285/35 back....its that good or can i do wider tires....one other ? is that offset gonna go flush as the stock 20' with 25mm spacers on the back?

Sent from my SPH-L710 2
 
Tire sizes are fine, you can go 305 in the back if you wanted. I have a 10.5" in the back and have run 285/295/305. If you're running 265 in front, a 305 will provide the closest look. A 285 on a 10.5 looks small relative toa 265 on a 9". I'm running 295 in back right now and 265 up front and it's close. Depending on tire size, you'll be close to the offset of the stock 20" on 25mm spacer.

---------- Post added at 08:56 AM ---------- Previous post was at 08:55 AM ----------

When I said sunken, I meant the offset of the wheel relative to the fender. The stock ones sit in pretty far. Are you referring to tire stretch? Or stance?

jakisbck said:
shadow what would give the tire a wider look i.e. sunken style? i thought the 10.5 would do that
Click to expand...
 
im referring to stance because I personaly dont like stretched tires on a rim (they almost always look like the rim wheel seperate from the tire on any bump/pot hole) PS Sorry for jacking your thread FXSOTx. Btw FXSOTX I like those rims also.
 
shadow so ill be good with no rubbing and not tuck....what do you think about the tires? jackis no problem and on the wheels i was intrested in the vossen cv3 but there a little expensive so i found these seem to like them a little more and theyre cheaper

Sent from my SPH-L710 2
 
yes I know that is what draw my attention as well $$$$$$:good:I saw the complete package tire and wheel but the ones that they specified (tire) I dont care for because theyre loud imo.
 
Resurrecting this thread...

I am considering purchase of 20x8.5 rims with 40 or 20mm offset. I want a flush look but some extension is not too bad. I'm not lowering vehicle. So will 40 offset be enough to go flush or will I still need spacers? If so then I might just go 20mm. I don't believe there will any rub issues with 20 offset. After browsing posts and garages, most still use spacers with aftermarket wheels on 2nd gen so looking for opinions before I purchase.. Thx - Mike
 
20 offset with 8.5" width will yield a better stance then the 40 offset, but don't think you will get a flush look though.
 
You must log in or register to reply here.
Back
Top