thinking of doing some 20x10.5 all around

[RaviB]

i know the offset is 40 on the stock 20 inch sport wheels... whats the lowest people have gone?

i'm looking at offsets in the 25-30 range, im going for this look:

http://www.vogueautodesign.com/Portals/0/LiveContent/757/Images/VAD Cayenne 03.jpg

example:

http://preferredcustoms.com/product...om-wheels/vossen-wheels/vossen-vvscv3-wheels/

http://preferredcustoms.com/product...ls/niche-touring-series/niche-nurburg-wheels/

i know its not 100% the same, but im looking to push the limit here with a 20" wheel (not lowered at the moment)

 

[meme405]

Lots of people with GTR wheels are running a square setup of 20x10.5, but if you end up using offsets like that you will have a wheel that sticks too far out of the side. Unless you plan on going widebody in the future.

 

[RaviB]

Lots of people with GTR wheels are running a square setup of 20x10.5, but if you end up using offsets like that you will have a wheel that sticks too far out of the side. Unless you plan on going widebody in the future.

thanks, whats the offset on the gtrs? that would be good starting point for me.

 

[meme405]

Wow, i mis-spoke I though the rear GTR wheels were a +45 offset but that is the front 9.5 wheels.

Check out this link:

http://www.2009gtr.com/2011/09/nissan-gt-r-wheel-and-tire-fitment.html

So by the logic of the 20x10.5 rears sitting flush you should be looking for a wheel that has a +25 offset.

So you were right in the beginning.

 

[shadow191]

+25 offset on 10.5 is flush at stock height. It will actually stick out a tiny bit at stock height depending on tire size.

 

[Ed@TunerStore]

I'm running 9.5 wide wheels with +6mm front and +21mm rear offsets lowered on coils with no problems