Megan Rear Upper Camber Kit ??

[BlackBadge]

I have been following up and reading the threads on here about people lowering thier Gen 2 FX/QX. I am lowered a good amount on coilovers for my 09 FX50S and looking to get the front and rear camber within spec. I seen a few people run the Megan rear upper camber kit with success but I was curious if they used the stock trailing arm/toe arm or did they replace that as well? I am about to order the front and rear Megan camber kit as I am getting new tires on this week. Any help would be appreciated! Thanks and the car height is pictured below!

 

[la_fx35]

I'm lower with H&R springs. I'm using Megan control arms. I didn't have to use the trailing arms and my toes are within specs.

 

[BlackBadge]

I'm lower with H&R springs. I'm using Megan control arms. I didn't have to use the trailing arms and my toes are within specs.

Thank you! I was hoping I didn't have to buy adjustable links for the trailing arms. Since I am in coils and sitting pretty low, should I order the SPC camber bolts to get more adjustment?

 

[la_fx35]

In my experience with these Infiniti SUV, toe specs are not impacted by lowered with coils or springs.

 

[BlackBadge]

In my experience with these Infiniti SUV, toe specs are not impacted by lowered with coils or springs.

Great news! Thanks la_fx35. I got the new tires on today and this weekend I am ordering the front and rear camber kits. She should be ready to after that!