Looking for aluminum OEM pedal set for '11

[Eothain]

Apparently Infiniti took away the aluminum pedals standard with the 2011 model. I have them on my M35S and I really like the look of them.

I've found a couple threads on here with 3rd party Chinese options on eBay but I'm not really interested in the non-OEM stuff that requires drilling. I'm having a hell of a time finding the OEM parts online. All those schematics are awful to look at, and a lot of items are classified in categories you would never think to look in. Anyone know the part numbers for the gas, brake, and dead pedal? Appreciate it very much!

 

[DPeters]

Mine has aluminum but the dead rest isn't...

 

[krycks]

OEM PART NUMBER.

180021NC0C Accelerator (this one is expensive)
46531JK00C Brake pedal cover
678401NF1A Foot rest

You will need to do the accelerator released position learning after the install of the new pedal.


ACCELERATOR PEDAL RELEASED POSITION LEARNING

Accelerator Pedal Released Position Learning is a function of ECM to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It must be performed each the time harness connector of the accelerator pedal position sensor or ECM is disconnected.

1.START

1. Check that accelerator pedal is fully released.
2. Turn ignition switch ON and wait at least 2 seconds.
3. Turn ignition switch OFF and wait at least 10 seconds.
4. Turn ignition switch ON and wait at least 2 seconds.
5. Turn ignition switch OFF and wait at least 10 seconds.