Help me pick wheels?

B

BiGrEd1011

Member
Im looking at some black Motegi MR118's But im so confused on the sizing what one to get and the exact bore for it. I see 110 112 and 120, Sorry i know people will say search but there is hardly any info at all out about ex35's. Im also debating 20's or 18's. the stock 17s got to go! Thanks guys!

http://www.amazon.com/s/ref=nb_sb_s...118,automotive&rh=i:automotive,k:motegi mr118

Free shipping to hawaii to ;) SHHHH dont tell amazon. lol. Their "super saver free shipping" includes hawaii lol
 
Link is not working. Go with 20". You will need 5-114.3mm bolt pattern. Hub bore is 66.1mm, but you can get custom hub centric rings for larger openings. Offset is important too.

• •
 
zebra555 said:
Link is not working. Go with 20". You will need 5-114.3mm bolt pattern. Hub bore is 66.1mm, but you can get custom hub centric rings for larger openings. Offset is important too.

• •
Click to expand...

Oh the link didnt work??? I clicked and it did :P should bring up a page of the rim i was looking at but a whole bunch of different sizes. Ill go with a 20 then. +40 offset? Or does it vary off of different rims?
 
$400 each isn't that bad. Wheels on my BMW were ~$1200 each in 20". But honestly I think your original Avarus wheels would look better than the Concept One's for your application. The Concept One's are going for the concave look which is pointless unless you're running a slammed car and aggressive offsets. Non lowered cars look silly with concave wheels. The Avarus wheels basically are imitation BBS which is more classic.

Also, FWIW, $171 isn't a terrible price for tires. Try buying 305/35/22...
 
I think ill shoot for those AV8's :) I REALLY like em. $1100 shipped. gunna have to save in the piggy bank for those lol. once i get em ill post pics :D I think those with springs will make the ex look so sexy. not so "chick car-ish" any more lol

---------- Post added at 10:32 AM ---------- Previous post was at 10:30 AM ----------
zebra555 said:
+40 will work, but not going to be flush. Not sure for what look are you going for.

• •
Click to expand...

What offset will sit flush then? Should i get 40mm with like 5mm spacers or something? 40 is the offset it comes up with in tire rack for the car. Those AV8's are +45mm offset

---------- Post added at 10:35 AM ---------- Previous post was at 10:32 AM ----------
shadow191 said:
$400 each isn't that bad. Wheels on my BMW were ~$1200 each in 20". But honestly I think your original Avarus wheels would look better than the Concept One's for your application. The Concept One's are going for the concave look which is pointless unless you're running a slammed car and aggressive offsets. Non lowered cars look silly with concave wheels. The Avarus wheels basically are imitation BBS which is more classic.

Also, FWIW, $171 isn't a terrible price for tires. Try buying 305/35/22...
Click to expand...

jesus i bought 295/40/18's nitto 555's for our mustang when i had it.......only $900 shipped ;)
 
Last edited:
At an 8.5" width and 45mm offset, it will be even with stock. Aren't stock EX wheels 8" wide? You could probably get a 10mm spacer and it would be fine. Slightly more aggressive, but don't have to worry about rubbing.

I ran 305/35/22 tires in back for a while, only choice is Pirelli Scorpion. $350 each...
 
You must log in or register to reply here.
Back
Top