Annoying Rattle on Drivers door

[Text]

I posted a while ago and never got a response but I have this Very annoying rattle coming from the drivers door. It's inside so I have to pop the panel off. Just looking to see if someone can point in the right direction of how to pop the panel off.

I have done this before on a 99' acura TL, but just want to make sure I have all the right screw and pop in positions accounted for.

I hope I can find someone inside the door that will be a quick fix. The rattle happens when I play music that hits certain notes to cause that annoying rattle. It's been 2 years already!

Edit: I forgot to mention, I have a 2011. I've only seen instructions for 1st gen FX's

 

[Text]

Nevermind. I found my answer.

Page 11-13

http://www.pdf-archive.com/2015/09/23/int/int.pdf

 

[Nuts]

My 2009 also has a driver side door rattle caused by low notes from the stereo. I've isolated it to near the arm rest because if I press down lightly with my elbow on the arm rest the rattling stops. Thanks for the document. I may try this some weekend.

 

[Themechanic]

Its the handle you pull to close the door. If you feel around the edges you can actually pull it off with your nails or a plastic prying tool. Theres tabs that break when you pop this handle off & rattle afterwards. If you remove the two screws in the handle & pop the door panel off theres a bunch of clips that hold the door panel against the door. These clips have a lil round insulator on them that usually falls off when popping the panel off they look like round gaskets. If your missing at least 1 it will rattle. You could make some out of some felt material and add them to your panels clips & the rattle should go away. Worked for me. Good luck!