Vettel body kit, at last

[fx37sUkraine]

We've been working on this bodykit for 6 months, front end will be finished in two weeks, want to know what should we edit or add, from your opinion, thanks in advance.






[emoji2]

---------- Post added at 12:15 PM ---------- Previous post was at 12:14 PM ----------

I'll keep the post updated as soon as manufacturing and fitment process will go through

Отправлено с моего HTC One_M8 через

 

[RIPnFX]

Good stuff, how much will this kit run?

 

[fx37sUkraine]

Don't know for now guys, depends on the stuff that will come with it, like led's and rear f1 light, the quality is superior and the price will not be as high as russian guys doing, I'd say it'll run a little above the OEM aero kit.


Отправлено с моего HTC One_M8 через

---------- Post added at 12:54 PM ---------- Previous post was at 12:51 PM ----------

It will be available on eBay from US seller, so there will be no problems with shipping from Europe etc.

Отправлено с моего HTC One_M8 через

 

[GEE50FX]

Sweet.

 

[fx37sUkraine]

This is our test version, so finished product will have some changes.



Отправлено с моего HTC One_M8 через

 

[nima]

Interested. Will it have unobstructed window for the forward facing radar in the lower driver-side corner of the vehicle? Any approximate ETA for production?
Also, the picture of the rear diffuser shows that its hugging the exhaust tip almost pretty tight, will it play nice with aftermarket exhausts like Ark Performance?

 

[fx37sUkraine]

1 .It will have proper place for fitment the radar.
2 . I hope it's going to be available in the US in 5-6 weeks or so, can't say surely because you never know which problems we will face in the manufacturing process, though front bumper will be finished in 2 weeks, the fitment process will also take time, I must ensure that quality will satisfy the user, so there's some work to do.
3. Exhaust tips.
The picture of unpainted rear bumper you've seen is an unfinished and non- fitted example of production that came straight from the manufacturing machine, after that it must be fitted which means cutting it in places needed, drilling a holes in a needed places etc.
So it will run nice with any exhaust tips, but not dual.

This example as you see has wide diameter exhaust tips which ( by my opinion ) is wider than ARK or Invidia

 

[jimmij]

Looks good.

 

[Themechanic]

Very nice

 

[nima]

Thanks for your answers, REALLY looking forward to the finished product. Please keep us updated.

 

[fx37sUkraine]

I have a question for you guys, should it come with front leds and rear f1 brake light, or not, cause theres a big choice for front leds starting from 30$ ending 200 for osram drl. Maybe you have some suggestions? I will post some variants I've seen, all of them was found on eBay.
So
#1 Osram leds runs from 150 to 170$


#2 Unknown manufacturer leds with turn signals


Let me know what you guys think

 

[nima]

I haven't done any research for the front LEDs, but any LED kit which is brightest and matches the color of the headlights (4300k) would be great, specially that they'll be replacing the fogs. The rear F1 brake light would be very cool too, but maybe with the option of setting it up as an "always-on" light.

 

[atl_red_G35]

Looking good there guys, something to improve the OEM lines of the Infiniti while adding more aesthetic look.

One suggest is that the middle section of the bottom splitter shouldn't be "raised" that high. You can drop it down a lil. From the render, it looks like it's a bout more than 30degrees angle ramps, I'd suggest no more than 20 deg in the difference

 

[nima]

I don't supposed the rear diffuser and the front bumper go through an air tunnel test? Someone from a different infiniti forum had similar suggestions as atl_red_G35.

1. the bottom edge of the front bumper lip should extend outwards further as a true splitter would.
2. are there LED running lights or fog lights integrated into the front bumper?
3. there should be active air scoops near or behind the OEM fog light position to increase aero dynamics and also for brake cooling
4. the rear bumper piece has too many lines / seams. It really should flow more and have a smoother transition to the OEM bumper cover. It pops out too much which makes it look like an after-thought as opposed to something that flows with the body.

 

[fx37sUkraine]

Thank for feedback, appreciate it.
1. We made an example where it was extended outwards, looked like a snowplow, really.
2. Currently in process of finding the right example to fit the front bumper with (leds), no fog light hole, but can be made after.
3. There is an active air scoop for brake cooling, all parts have passed the air tunnel test on Antonov Aircrafts plant, and was designed by aircraft engineer (I'm a pilot btw).
4. The rear bumper looks awesome when you see it in real life, maybe the pic is made so.


Отправлено с моего HTC One_M8 через

---------- Post added at 08:05 AM ---------- Previous post was at 07:20 AM ----------

Latest pics[emoji2]

 

[iDrive]

So theres going to be an option to order for fogs or the leds?

---------- Post added at 09:36 PM ---------- Previous post was at 09:30 PM ----------

Also will it be easy to get to canada? Its hard to get anything here

 

[fx37sUkraine]

It's not gonna be hard getting it for Canada, for sure

Отправлено с моего HTC One_M8 через

---------- Post added at 04:03 AM ---------- Previous post was at 02:17 AM ----------

I think the only option is going to be for led's like the Original vettel, but if you want a fog lights installed, you have to install them manually with your local electric

Отправлено с моего HTC One_M8 через

 

[nima]

Very anxious to get my hands on the kit..

 

[2010fx35]

Looks sweet. Just wondering for the back piece, does it just go over the existing plastic part or is there a way to just remove that plastic trim?

 

[iDrive]

It's not gonna be hard getting it for Canada, for sure

Отправлено с моего HTC One_M8 через

---------- Post added at 04:03 AM ---------- Previous post was at 02:17 AM ----------

I think the only option is going to be for led's like the Original vettel, but if you want a fog lights installed, you have to install them manually with your local electric

Отправлено с моего HTC One_M8 через

What I meant was can we just keep our factory fog lights and install the front?