GTSPEC Strut Tower Group Buy!

[Koso Kustomz]

I know ALLOT of you have been wanting this, so I'm doing it!

ONCE THE ORDER IS RECEIVED BY GT SPEC, ITS 60 DAYS TELL THEY ARE SHIPPED OUT.

I talked to GTSPEC today, the informed me that the Infiniti Line is not a very high seller. As you guys know these are hard to get. As of today, the Strut Bars are out of stock, but will be back in stock closer to mid month.

Also the lower bars are not being made any more, however they said if I can get orders of 10 or more of each, they would make them for you guys. When ordering large like this, that mean's the price is better for you guys.



This will be for 1st gen and 2ed gen FX's

Pricing for Strut Tower Bars are $225 MSRP

Price for the Group Buy $199

http://store.kosokustomz.com/Infinti-_c_131.html



Pricing for the Lower Lateral Bar for 2003-2008 FX MSRP $109

Price for the Group Buy $90

http://store.kosokustomz.com/GTSPEC-...545_p_178.html


Payment will be done via my website so its all secure, I will give you a coupon code that will reduce the price. That price is only if the 10 are meet.

If you have any questions please ask.

If there is a item they sell that more people are interested in than the lower lateral bar, let me know and I can do it for that one.


List for Strut Tower Bar:
1 Viperi
2: shumby
3 1FX502NV
4
5
6
7
8
9
10

List for Lower Bar:
1 Viperi
2Renhalt
3
4
5
6
7
8
9
10



Other Braces offered by GTSPEC:

2009-2010:

GTSPEC Front 2 Rear Tie Brace For Infiniti FX35/50 (2009+)
$80.00


GTSPEC Front 4 Points Ladder Brace For Infiniti FX35/50 (2009+)
230.00


2003-2008 FX35 / FX45:

GTSPEC Mid Chassis Brace For 2003~2008 Infiniti FX35/45
230.00


GTSPEC Front Lower Engine Tie Brace for FX35/45
210.00


GTSPEC Front 4 Point Ladder Brace FX35/45
210.00


GTSPEC Rear Lower Lateral Reinforcement Brace for FX35/45
$90.00


GTSPEC Rear Lower Tie Brace for FX35/45
85.00


GTSPEC Aluminum Under Panel For FX35/45 (F50)
325.00



I can do any of the above as long as I have a Min. order of 10. ALL PRICING ABOVE IS FOR A GROUP BUY ON THAT ITEM.

[Viperi]

im down for both or all.... put me down

[Koso Kustomz]

Added :)

---------- Post added at 03:57 PM ---------- Previous post was at 03:43 PM ----------

Also, my Group Buy's are a set in stone, there is no going up or down on the number of people needed ect.

As always fill free to PM me, and I will give you our number if you want to talk on the phone.

[RAGTPZ]

Do you by chance have pictures of this installed with the V8 or have any idea of if there are any hood clearance issues? I am not a big fan of strut tower braces, I have seen too many of them that can be bent by hand to trust them so I am pretty skeptical. On the other hand, any chance on doing the four point ladder brace???

Thanks!

Randy

[Viperi]

should post ALL the braces gt specs have to offer for our fxs and see whos interested in what

[Koso Kustomz]

Hey Randy,

I don't have any pictures of them on the V8, how ever they do fit on there with the engine cover fine, and there is no hood clearance problems. I did some looking into the GTspec line, and everyone that has one, really likes it. Before I will carry a product, I will look into there background first.

As far as the ladder brace, I could do that. Depending on if there are more people interested in that.

[AeroBFA]

Do you by chance have pictures of this installed with the V8 or have any idea of if there are any hood clearance issues? I am not a big fan of strut tower braces, I have seen too many of them that can be bent by hand to trust them so I am pretty skeptical. On the other hand, any chance on doing the four point ladder brace???

Thanks!

Randy

The GTSpec bars are very good quality and very solid. I doubt you will be able to bend these by hand, lol.

[Koso Kustomz]

LOL. Thanks for that :)

[shumby]

down for the stru bar if it fit the 50 and you will ship to canada

[Koso Kustomz]

I will ship to Canada, but it will cost you shipping charges.

Also, to be upfront, since I have seen allot of group guys go down on here. GTSPEC messaged me again and now they told me all there bars are sold out again and they wont have any till March. So I have some other supply companys that sell GTSPEC stuff, and I'm going to see if they have them in stock. If not I will let you guys know.

[Mongolian]

Do you by chance have pictures of this installed with the V8 or have any idea of if there are any hood clearance issues? I am not a big fan of strut tower braces, I have seen too many of them that can be bent by hand to trust them so I am pretty skeptical. On the other hand, any chance on doing the four point ladder brace???

Thanks!

Randy

Bend by hand?! Serious?! You gotta be freakin' Hulk or Superman to bend a GT-Spec bar.

[AeroBFA]

Seriously, if you have two first gen strut bars, they are strong enough to have a sword fight with.

[dwaynedadon]

would this fit my 50 with all the covers on?

[Koso Kustomz]

would this fit my 50 with all the covers on?

Yes it will

[shumby]

List for Strut Tower Bar:
1 Viperi
2 shumby
3
4
5
6
7
8
9
10

List for Lower Bar:
1 Viperi
2
3
4
5
6
7
8
9
10

[Koso Kustomz]

Thanks man. Got you down on the first post also

[1FX502NV]

I'm in for a front strut bar '09 FX50

[Koso Kustomz]

I'm in for a front strut bar '09 FX50

Got ya

[Renhalt]

Im in for the lower rear lateral, I pm'ed you as well, thanks!

[Koso Kustomz]

Got you down. Thank you